Siemens DIN power supplies now at RS
The single-phase SITOP PSU6200 power supplies are designed for use in distributed power applications in machine control boxes or in small cabinets with plug-in terminals that support easy electrical connection. A key feature of the series is its very low power loss across the entire load range, especially in idle mode, which makes the units ideally suited for automated machines in plants that are often in standby operation.
The DIN power supplies have DC-compatible input voltages from 85 to 275V(AC) or 99 to 275V(DC) and provide output DC voltages from 12 to 15.5V at 2A, 7A, 12A, or 24 to 28V at 1.3A, 2.5A, 3.7A, 5A, 10A, 20A (depending on model).
Another key feature of the series is the integration of advanced diagnostic capabilities, enabling the units to indicate their operating status and current utilisation, as well as end-of-service life via LEDs. They also output a serial code via the diagnostics interface, which can be read via a digital input on a PLC and evaluated by a function block. Status and operating parameter information includes: DC ok; utilisation percentage levels; remaining service-life warning – for a value below 10%; output current and voltage to 1A and 0.1V resolutions, respectively; and device temperature warnings.
The SITOP PSU6200 series from Siemens is shipping now from RS in the EMEA and Asia Pacific regions.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
