Single and multi-channel isolated switches for hazardous area load control safety
Available in both single- and multi-channel models and offering up to four channels, the ISO/ISL series is designed to perform under both normal and abnormal conditions without releasing energy values that could lead to ignition of a flammable or combustible atmospheric mixture in its most easily ignited concentration.
ISO/ISL series switches feature a fully isolated output which turns on when the control switch input from the hazardous location is closed. The multi-channel series is available with choice of latching or non-latching output. When the control switch input opens, the non-latching isolated output turns off; whereas, the latching series output remains on, so long as control switch input 1 is activated. Single-channel ISO series plug-in devices come equipped with integral spring mating clips which secure the device to the base. The 8-pin socket is also included with Style A plug-in devices.
The Style N, featuring a surface mounted enclosure, is sealed with a high-quality epoxy resin and five #8-32 screw terminals. Single-channel Style (A), Style (N) and multi-channel Style (E) isolated switches are available in both 24 VAC and 120 VAC control voltages. The ISO/ISL series has been tested and approved for listing under Underwriters Laboratories (UL) UL913, under intrinsically safe apparatus and associated apparatus, as both plug-in and base mount devices. Inputs to these switches have been approved for use in all classes, groups and divisions of hazardous locations.
Visit Marsh Bellofram at www.marshbellofram.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
