MENU

Smart windows use sunlight for data transmission

Technology News |
By Rich Pell


Researchers at KAUST say they have designed a smart glass system that can modulate the sunlight passing through it, encoding data into the light that can be detected and decoded by devices in the room. The use of sunlight to send data, say the researchers, would offer a greener mode of communication compared to conventional Wi-Fi or cellular data transmission.

The idea to use sunlight as a way to encode date came about when the researchers had been exploring data encoding into an artificial light source.

“I was simply hoping to use a cell phone camera to record a video of the encoded light stream to try to decode the video to retrieve the data,” says Basem Shihada, an associate and founding professor of computer science and electrical engineering in the CEMSE Division at KAUST. “That’s when I thought, why not do the same with the sunlight? This would be much easier and can be done over the cell phone camera too. So we began to explore sunlight as an information carrier.”

The researchers designed a sunlight communication system comprised of two parts: an LCD-based light modulator that can be embedded in a glass surface and an in-room receiver.

“The modulator is an array of our proposed smart glass elements known as Dual-cell Liquid Crystal Shutters (DLSs),” says Osama Amin, a research scientist in Shihada’s labs. The liquid crystal shutter array, which would act like a filter to encode signals into the light as it passes, would require just 1 Watt of power to operate, which can be supplied using a small solar panel.

In previous optical wireless communications system designs, data has typically been encoded by varying the light intensity. But, say the researchers, if the frequency of these intensity changes is too low, it can be detected by the human eye and cause an uncomfortable flicker effect.

The DLS is therefore designed to manipulate a property of light called polarization.

“Change in light polarization is imperceptible to the eye, eliminating the flicker problem,” Sahar Ammar, a student in Shihada’s team. “The communication system works by changing the polarization of the incoming sunlight at the modulator side. The receiver can detect this change to decode the transmitted data.”

According to the researchers’ calculations, the proposed setup could transmit data at a rate of 16 kilobits per second.

“We are now ordering the necessary hardware for a testbed prototype implementation,” says Shihada. “We would like to increase the data rates from kilobits to mega- and gigabits per second.”

For more, see “Design and Analysis of LCD-Based Modulator for Passive Sunlight Communications.”


Share:

Linked Articles
10s