SMT board stacking connector with 0.8mm floating mechanism
/* Style Definitions */
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-bidi-font-family:”Times New Roman”;
A special ‘S’-shaped section in each contact strip provides the necessary flexibility, and with a reaction force of less than 0.098N per contact in both lateral and longitudinal directions the floating mechanism is also highly compliant. Despite the small size of the QZAC-A connector series, each contact has a current capacity of 0.3A dc, a voltage rating of 120V ac and a withstand voltage of 250Vac for one minute.
The contact resistance is 90MΩ and the insulation resistance is 1,000 MΩ at 250V dc. The QZAC-A series stacking connector is available with a stack height of 15mm and footprints of 9x18mm (20-pin). The 9x42mm (80-pin) and 9x58mm (120-pin) versions will be available soon. The plug connector comprises four parts: contacts, inner and outer housings and a hold-down.
In addition, for automatic pick-and-place, the plug connector can be fitted with a vacuum cap. The receptacle comprises three parts: contacts, housing and a hold-down. A guide post and corresponding hole allow blind mating of plug and receptacle, while miss-mating is avoided, thanks to L-shaped keying built into both plug and receptacle housings.
Visit Honda Connectors at www.hondaconnectors.co.uk