MENU

Solid cases target Raspberry Pi 3 and Pi 4 SBCs

Solid cases target Raspberry Pi 3 and Pi 4 SBCs

New Products |
By eeNews Europe



For those two models Fischer Elektronik adapted the existing RSP 1 (case for Raspberry Pi 2 model B, Raspberry Pi 3 Model B und B+. For the Raspberry Pi 3 Model A+ Fischer Elektronik is now offering the case RSP 2, while you have to choose the case RSP 3 for the Raspberry Pi 4 model B.

The solid case consists of an upper and lower shell which is made of a stamped and bent aluminium sheet with 1,5mm thickness. Each PCB is mounted to the lower shell with help of M2,5 oval head screws on four spacer bushes made of steel. A quick access into the cases is allowed by mounting the upper shell to the lower shell with only one screw and the tongue-and-groove system on the front side of the case. Due to this easy assembly construction a simple access to the GPIO-contacts of the Raspberry is ensured. The access to the microSD card slot is possible from the outside so that an opening of the case is not necessary. The ventilation slots in the upper and lower shell ensure a good heat dissipation which is an advantage especially for the Raspberry Pi 4 model B. The highly clocked processor with four cores is the main heat source of this model. Due to the natural convection the heat exchange with the environment can take place. If required the RSP cases can be equipped with a slip-resistant, single-side adhesive, transparent device base. If a wall mounting is needed, fastening clips (option L) can be selected, for RSP 1 and RSP 3 fitting to the standard monitor bracket VESA MIS-D 75 x 75. A fixing of mounting rail is also possible with the option KL.

Fischer Elektronik – www.fischerelektronik.de

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s