Synchronous 42V step-down DC-DC converter adds dual lossless controls

Synchronous 42V step-down DC-DC converter adds dual lossless controls

New Products |
By Nick Flaherty

The LTC3126 2.5A, 42V step-down switching regulator  combines internal power switches and synchronous rectification for 95% efficiency over the voltage range, enable a fast transient response and loop stability while switching at 2MHz. This allows designers to avoid critical noise-sensitive frequency bands such as AM radio, while providing a highly compact solution footprint.

The LTC3126’s current mode topology is internally compensated, eliminating the need for external compensation components. Burst Mode operation maintains high efficiency at low output currents while keeping peak-to-peak output ripple below 1%. Further, it features a quiescent current under 2µA in no-load standby conditions, ideal for always-on systems and portable applications. The LTC3126’s wide 2.4V to 42V input and 0.818V to VIN output voltage ranges are well suited for automotive applications which must regulate through cold-crank, load dump and stop-start scenarios. Other key applications include portable industrial/communications test equipment, battery and supercapacitor backup power systems, automotive power with battery backup, uninterruptible power supplies, and systems powered by unregulated wall adapters or single to multicell stacks of most battery chemistries.

The LTC3126’s integrated lossless PowerPath circuitry supports seamless operation from two separate input power sources. Pin-selectable ideal diode-OR and priority input modes with user-programmable undervoltage lockout thresholds provide full control over the transition between the input power sources. The fast, automatic switchover provided by this internal PowerPath eliminates the need for hold-up capacitors and minimizes disturbances on the output rail. An active input channel indicator and independent input and output power good signals provide complete feedback of the power system status. Other features include 1µA current in shutdown, internal soft-start and thermal protection.

The LTC3126 is housed in thermally enhanced 28-lead TSSOP and 4mm x 5mm QFN packages. These packages, when combined with the device’s high switching frequency that enables small external inductors and capacitors, provide a compact, thermally efficient footprint. E-and I-grade devices both feature an operating junction temperature of –40°C to 125°C. The H-grade high reliability version is offered in TSSOP only and is tested and guaranteed to operate from –40°C to 150°C operating junction temperature.

Pricing starts at $6.25 each in 1000-piece quantities.

For more information, visit


If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles