The APR346 is designed to operate in Continuous Conduction Mode (CCM), Discontinuous Conduction Mode (DCM) and Quasi-Resonant mode (QR) to drive an external MOSFET.
Using Synchronous Rectification (SR) gives significantly higher performance and efficiency than diode-based secondary side rectification and is now preferred by power adapter manufacturers. The architecture is expected to form the basis of power adapters for notebooks, mobile phones and a range of other portable devices, many of which will be adopting the USB Type-C connector with PD (Power Delivery) capabilities.
The APR346 requires very few additional components and, because it is designed to operate with an external MOSFET, it offers maximum design flexibility. With fast turn-on and turn-off times of 70ns and 100ns (typical) respectively, it achieves high performance through directly sensing the Drain-Source voltage of the external MOSFET and rapidly turning the MOSFET on or off according to demand from the load. A built-in minimum on-time of 1.6μs (typical) effectively blanks out any potential Drain voltage ringing to maintain efficient operation as the load current begins to flow through the channel.
The APR346 is available in the small outline SOT26 package and is priced at $0.40 in 1000 units
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.