TE Connectivity issues industrial mini I/O Ethernet pin-out recommendations

TE Connectivity issues industrial mini I/O Ethernet pin-out recommendations

New Products |
By eeNews Europe

First introduced in 2012, TE’s Industrial Mini I/O connectors are only one-quarter the size of the conventional RJ45 plug, giving design engineers the flexibility to use limited space on the PCB more effectively. Designed with two points of contact, this connector is built for the demands of an industrial and high-vibration environment, enabling increased productivity through a more reliable connection.

To prevent accidental unplugging of a network connection due to shock, vibration or pulling on cords, TE’s Industrial Mini I/O connector offers a unique locking system with 100N of pull force.

With its piercing termination, the Industrial Mini I/O field-installable version decreases the time needed to terminate wires through soldering. With an easy-to-use hand tool, field assembly in virtually any environment is now possible.

TE’s Industrial Mini I/O connector has two interface types (I and II). Both are standardised by IEC/PAS 61076-3-122 and help prevent cases of accidental mis-wiring. The connectors also support both 4-and 8-wire Industrial Ethernet at 10/100Mbps and 1Gbps.

TE recommends the pin-out in the diagram (for 4- and 8-wire Ethernet) for both Type I and Type II Industrial Mini I/O connectors.

Following these pin-out recommendations will ensure equipment interoperability while using available equipment with Industrial Mini I/O interfaces. The IEC/PAS 61076-3-122 has the pin assignment for both Types I and II included as an integral part of this interface standard. TE’s standard cable assembly portfolio and other future Mini I/O product extensions for Types I and II will support this pin-out recommendation for Ethernet communications.

TE Connectivity;

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles