Laird Thermal Systems has launched a solid state thermoelectric cooling system that can keep machine vision sensors operating in optimum condition.
Image quality of machine vision systems will typically degrade when the CCD and CMOS imaging sensors operating temperature exceeds 50°C. While passive cooling techniques may be sufficient for machine vision systems in indoor environments, outdoor applications often exceed 40°C, requiring an active cooling solution. This thermal solution must fit tight geometrical space constraints, prevent thermal shorting and protect sensors from moisture intrusion and outgassing.
The HiTemp ETX cooler can be used to keep the operating temperature below its maximum limit and prevent image quality from deteriorating.
These solid-state coolers use the Peltier effect to create a temperature differential to transfer heat from one side of the module to the other. They are integrated directly into the machine vision sensor assembly and require a heat sink or other heat exchanger to rapidly dissipate heat away from sensitive camera components.
Supporting machine vision applications operating in temperatures between 80°C to 120°C, the HiTemp ETX Series offers a cooling capacity from 7.7 up to 322 Watts – all in a compact form factor. While standard thermoelectric materials can reach temperature differentials up to 78°C with Th=50°C, the HiTemp ETX Series creates a maximum temperature differential (delta T) of 83°C.
“Our new HiTemp ETX thermoelectric cooler is assembled with advanced thermoelectric materials that boost cooling capacity by up to 10%, said Andrew Dereka, Product Director at Laird Thermal Systems. “The robust module construction allows it to operate in high temperature environments where standard thermoelectric coolers fail.”
The HiTemp ETX Series include more than 50 models with a wide variety of heat pumping capacities, sizes and voltage inputs.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.