Three phase EMC filters for UPS up to 150A
Typical standards include EMC IEC 62040-2 and EN 50091-2. One of the EMC test to carry out is the conducted emission test. In this test, the power noise is measured using a LISN. The measurement frequency is 150 kHz to 30 MHz and the maximum limit allowed depends on the applicable standard and the environment where they are going to work, domestic or industrial. To overcome these conducted emission tests, Premo Group offers a wide range of EMC filters for UPS, with various ranges of current, voltage and filter stages, designed and built according to UL1283 and EN60939-2 standards. The PFT series is a three-phase with neutral filter, specially designed for three-phase UPS without transformer. The PFT Series offers currents from 3 to 150A and a working voltage up to 520Vac, 50/60Hz, providing high common mode attenuation and differential, as well as low leakage current. This family of filters offers a compact design and is available in different versions, with fast-on connection, screws or terminal blocks.
Visit Premo Group at www.grupopremo.com
Download this product datasheet at www.grupopremo.com/es/file/73
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
