Touchstone Semiconductor unveils free demo boards offer
Every demo board Touchstone makes is designed for simple set up and easy analysis. Just connect a power supply, and users can easily observe the performance of the Touchstone part.
The TS1001 demo board provides both non-inverting and inverting configurations. The TS1001 op amp is the first and only single-supply operational amplifier to cut power requirements at least in half compared to any other amplifier. The TS1001 is fully specified to operate on a 0.8 V supply while consuming less than 0.6 µA supply current. The TS9001 demo board contains the push-pull TS9001-1 and the open-drain TS9001-2. Each circuit is configured as a simple threshold detector with additional hysteresis.
The TS9001-1 and the TS9001-2 voltage monitor ICs incorporate a +1.252 V reference with a 1% initial accuracy. The TS9001-1 offers a robust push-pull output stage with increased output current drive while the TS9001-2 offers an open-drain output stage that can be used in mixed-voltage systems design. Both TS9001s are fully specified to operate from +1.6 V to 5.5 V supplies while consuming less than 0.65 µA supply current.
Engineers can register for their free demo boards at www.touchstonesemi.com/freedemoboards.html.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
