Triac-dimmable LED controller/driver for LED lighting to 25W
Intended for offline triac-dimmable LED lighting applications, the single-stage, buck-boost, non-isolated configuration of the AL1692 provides a high power factor, low total harmonic distortion and high triac dimmer compatibility solution to meet NEMA Solid State Lighting (SSL) standards. The IC eliminates an auxiliary winding and provides an accurate output LED current that ensures line and load regulation, while its operation in boundary conduction mode (BCM) achieves high-conversion efficiency and eases EMI design to further reduce BOM cost.
The AL1692 offers four internal MOSFET options with various drain-source on-resistances for either 120 VAC or 230 VAC operation, and to cover a wide range of output voltage/current applications including: 4.7Ω/700V, 4Ω/600V, 3.2Ω/500V and 2.8Ω/400V. Internal protection features, such as LED open/short circuit protection, over-temperature, under-voltage lockout, leading-edge blanking, cycle-by-cycle over-current protection, and thermal fold-back protection improve system safety and reliability.
The controller-only version of the AL1692 is in an SO-8 package while the MOSFET options are supplied in an SO-7 package. 10k pricing for each:
- AL1692S-13 (controller-only) … $0.15
- AL1692-10ES7-13 (1A/700V MOSFET) … $0.18
- AL1692-20CS7-13 (2A/600V MOSFET) … $0.20
- AL1692-30BS7-13 (3A/500V MOSFET) … $0.20
- AL1692-30BAS7-13 (3A/400V MOSFET) … $0.19
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
