MENU

TVS diode arrays safeguard HBLED strings

TVS diode arrays safeguard HBLED strings

New Products |
By Julien Happich



Their very low loading capacitance (typically 8.5pF per I/O) also makes them suitable for protecting high speed signal pins. The chips feature a high standoff voltage up to 60V allowing them to protect strings of up to 15 high brightness LEDs used in backlighting or edge lighting for Ultra High Definition TVs from ESD and EFT. Each four-line DFN array can protect up to four lines of LED strings. A single four-line device is sufficient for smaller outline displays, while large format displays require just one device per quadrant. The SP1064 Series is rated for at least 15kV contact protection against an 8/20µs ESD event. The SP1064 series TVS diodes are available in surface mount uDFN-10 packages in tape and reel format in quantities of 3,000.

Visit Littelfuse at www.littelfuse.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s