The new ultrasonic sensor uses patent-pending technology developed by TTP in Cambridge to precisely measure the speed of sound in a gas to determine its composition. While current infrared gas sensing devices for carbon dioxide can cost over £240 and paramagnetic systems for oxygen around £120, TTP believes that its new SonicSense devices will cost between £3 and £6 each in volume production. Potential medical applications include respiratory monitoring, anaesthesia and heart monitoring.
The ultrasonic sensor draws on TTP’s expertise in nonlinear acoustics and piezoelectric devices. Once the speed of sound through the gas is measured, thermal compensation is applied before the composition of a binary gas mixture is calculated. Additional bulk gas properties such as density can also be determined using the same sensor architecture to enable more complex gas mixtures to be evaluated.
TTP has developed prototype sensors for their existing clients with a sensor diameter of only 24 mm and a depth of 18 mm – but it is expected that this dimension can be reduced to less than 5 mm. With a simple, robust design and power consumption of around 10 mW – compared to over 1 W for some gas sensors – the TTP device is aimed at long-lifetime, battery powered applications with no in-field replacement or calibration required.
“Many medical or industrial gases are expensive or difficult to measure directly,” said Andrew Baker-Campbell, one of the inventors of this technology at TTP. “SonicSense opens up the possibility of replacing high-cost sensors in existing products or enabling exciting new solutions for applications where sensing gas is currently prohibitively expensive.
As well as medical applications we are looking at a wide range of use-cases for gas safety and industrial monitoring and control, and are keen to work with development partners who see an opportunity to harness and commercialize low-cost sensing.” www.ttp.com
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.