Universal digital output driver iC features configurable NPN/PNP/PP/IO link driver stages
From an input voltage of 8 to 30 V an integrated linear regulator provides the sensor electronics with a stable +3.3 V voltage and 10 mA loading. The iC-DX3 switching output supplies at least +/-150 mA of drive current; at 200 mA minimum drive current iC-DXC is also IO link-compliant, using the feedback channel with a polarity monitor for wake-up detection. The integrated temperature monitor protects both devices against overtemperature by disabling the output driver. An integrated reverse polarity protection circuit safeguards the sensor against incorrect wiring of the supply voltage.
To drive inductive loads, a flyback circuit has been integrated into the device.
iC-DX3/DXC3 are suitable for use as full interfaces with a sensor supply, for small, digital switching sensors such as: inductive or capacitive proximity switches; ultrasonic switching sensors; one way and reflective light barriers; pressure sensors/switches; magnetic, capacitive, or optical end switches and gear wheel sensors.
The iC-DX3/DXC3 output stage can be controlled using inputs IN/NIN and OE to provide output functions as NPN, PNP, or push-pull driver. For sensors that are intended for IO link operation iC-DXC has an integrated feedback channel with a polarity monitor for wake-up detection. The flexibility enables the user to meet output configuration requirements on the worldwide sensor market (NPN, PNP, PP, and IO link) with little logistical effort and without having to invest further in development.
The small DFN6 housing for iC-DX3 (2 mm x 2 mm) and iC-DXC3’s larger DFN8 package (3 mm x 3 mm) allows sensors with tiny dimensions to be assembled. The operating temperature range covers -40 °C to +125 °C.
More information about the iC-DX3 sensor at www.ichaus.com/sensor
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
