“To our knowledge, this is the only multi-standard wireless power transmitter that’s been shown to operate simultaneously at two different frequencies with high efficiency,” said Patrick Mercier, a professor in the Department of Electrical and Computer Engineering at UC San Diego who led the study published in the journal IEEE Transactions on Power Electronics.
The development addresses the incompatibility of three competing wireless charging standards, Qi, Powermat and Rezence. Each wireless charger offered in the market to date supports, either the Qi, Powermat, or Rezence standards and will only work with devices that support the same standard.
The Qi and Powermat standards operate at around 200kHz while the Rezence standard operates at 6.78 MHz. Wireless chargers are typically built with a transmitter coil optimized to work at a set frequency but are extremely inefficient at other frequencies.
The Mercier transmitter contains two coils; an inner coil optimized to operate at a frequency of 200kHz, and an outer coil optimized to operate at 6.78MHz. The design includes a filtering circuit to prevent the coils from interacting with each other and causing efficiency losses. Space is saved by putting the low frequency coil inside the geometry of the high frequency.
At 25mm separation, the system is able to simultaneously deliver 9 W and 7.4 W with efficiencies of 78 and 70.6 percent at 6.78MHz and 200kHz, respectively.
The researchers have filed patents on this technology and are looking for commercial partners to help bring the universal wireless charger into the market.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.