USB 3.0 industrial camera boasts up to 60 fps in full 2 megapixel resolution
In conjunction with the high speed USB 3.0 interface, the 29x29x29mm camera is particularly recommended for use in 3D image processing, for example in process automation or vehicle body inspection, as well as in medical technology, robotics and logistics. It achieves a frame rate of 60 frames per second at full resolution, up to 100 fps in VGA quality. The UI-3250CP model has a choice of three shutter modes, which can be changed during operation. Thanks to multi AOI, with four AOIs and a sequential AOI function, different features can be captured with a very high frame rate or a series of exposures can be produced. In addition to a line scan mode, the camera also has a log mode. This enables high contrast scenes to be reproduced in perfect image quality with just one shot. As well as trigger, flash and pulse width modulation, it features two universal GPIOs (general purpose I/Os). With a magnesium housing and screw-on Micro USB 3.0 and Hirose connections, it can withstand adverse ambient conditions in industrial or outdoor environments.
Visit IDS Imaging Development Systems at www.ids-imaging.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
