USB-connected analog and digital radio test set
The radio’s standard USB programming cable is used directly by the 3920 to control the radio in test mode. Both analog and digital tests are performed to ensure the radio is performing at optimum performance. Alignments are available for power, frequency, deviation balance and front End. P25 Performance tests are available for modulation fidelity, symbol deviation and RX BER (Bit Error Rate). Proper alignment will ensure the radio has maximum coverage performance. Test results are automatically stored each time a radio is tested. Stored test results can be moved to a computer or printed directly from the instrument itself.
Specifications are user definable allowing specific customer requirements to be accommodated. The application also has the ability to sweep test cables to gain a loss factor for each test frequency that is being tested. Loss factors can be much different between frequencies and bands. The compensation factor is automatically applied to all power readings as well as a compensation factor for the signal generator when testing RX BER. The 3920 is the latest in next generation portable test equipment for advanced professional analog and digital radio communications. It supports a wide variety of Motorola technologies including SmartNet™/SmartZone™, P25, HPD and MOTOTRBO™ test capabilities.
Visit Aeroflex at www.aeroflex.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
