USB3 board camera for embedded systems and OEMs
The module is the first in a series of cameras designed to work with image processing firmware developed in-house by Videology. OEMs and developers can incorporate individual IP functions on an FPGA or use customer-specific adaptations.
The 24B5.0XUSB3 camera is equipped with a 1/2.5-in. CMOS image sensor with rolling shutter and offers a high level of light sensitivity into the near-infrared range. The frame rate reaches 14 fps at full resolution (2592 x 1944V), and up to 120 fps is possible with VGA resolution. In addition to the USB3 output, the model comes with a parallel BT.1120 (10-bit) video output. This means a connection is available for external video processing or analysis, allowing the USB and BT.1120 connections to be used simultaneously.
FRAMOS adds: “Videology focuses on the miniaturization of cameras and modules for easy integration into embedded systems and OEM solutions. The individually programmable 24B5.0XUSB3 module has a compact shape and is available in a monochrome version; a colour version is set to be launched in the near future.”
At 32×32 mm, the double board comes in a small and thus easy-to-integrate outline. The inputs and outputs are configurable, the 24B5.0XUSB3 is DirectX, DirectShow and UVC-compliant as well as compatible with Windows (7, 8 and 10) and Linux platforms. A complete SDK is available.
Framos; www.framos.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
