MENU

V2X end-to-end tester demonstration spotlights driving hazards

V2X end-to-end tester demonstration spotlights driving hazards

Technology News |
By eeNews Europe



The joint 802.11p test demonstrator from Rohde & Schwarz, Vector and Commsignia will be on display at the ITS World Congress in Bordeaux October 5 to 9, 2015 at the Rohde & Schwarz booth (F22).

The V2X end-to-end tester for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) applications is based on the fully automated R&S TS-ITS100 RF conformance test system from Rohde & Schwarz.

Future intelligent transport systems (ITS) will be implemented using standards such as IEEE 802.11p WLAN to enable vehicles and infrastructures to share information in order to warn drivers of hazards such as accidents, construction zones and slippery roads.

The RF conformance test system is augmented by the Vector CANoe application and communications test system, which monitors radiocommunications and internal vehicle buses and even simulates some of them. The Commsignia ITS-OB2-M onboard unit for 802.11p serves as the DUT. The overall system is the first to enable automotive manufacturers and their suppliers to verify the functionality and performance of vehicle-to-vehicle applications with an end-to-end test – from transmitting RF signals over a simulated channel to receiving the RF signal via an onboard unit and subsequent presentation on an in vehicle display.


During the demonstration, an 802.11p message ‘Warning, vehicle braking’ is transmitted via an RF signal. The R&S TS-ITS100 generates an 802.11p RF signal with the required content and transmits it to the Commsignia onboard unit. The Rohde & Schwarz system uses fading to impair the signal and simulate real-world propagation conditions. The ITS-OB2-M receives the RF signal, converts the message to CAN bus format and feeds it to the vehicle bus monitored by the CANoe system. CANoe verifies whether the RF signal was correctly transmitted from the onboard unit to the CAN bus despite fading. The message is then forwarded to an in vehicle display simulated by the CANoe system.

www.rohde-schwarz.com/product/ts-its100.html

www.vector.com/car2x_en

www.commsignia.com/hardware/

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s