Vision server supports up to eight individual GigE ports
The CPU as well as the ECC DDR3 memory chips are soldered on-board, allowing to mount them direct to the housing for the best cooling and to avoid heat pipes. The new PIP30 Family is designed such, that the Fit & Form still remains the same as when the first PIP was introduced in 1996. Inputs are reverse polarity and load dump protected, for a power range from 9 to 36VDC.
Galvanic separation can be added internally. Up to four mass storage devices can be integrated that can also be configured as RAID. WLAN or GPS are available as options.
A large set of interfaces include up to seven USB (3.0 and 2.0), up to four serial lines (RS232/485), PS/2, external SATA port, and as specialty an external PCI-E or eSATA port. Internally available are two SATA interfaces. What’s more, the unit can easily be expanded over various expansion ports like; up to 6 miniPCIe, PCI-104, PCI/104-Express, or PCI-Express x 16.
Visit MPL AG at www.mpl.ch
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
