Webinar; ISO 26262 considerations in SoC design
Synopsys notes that, “As cars integrate more electronics to control safety-critical components, the SoCs within the system must routinely perform in-field self-test to detect structural defects due to ageing as well as comply with ISO 26262. These self-tests must execute at power-up and on-the-fly, out in the field during regular operation. To address these challenges, Bosch is integrating multiple Synopsys test solutions, including ECC mechanisms and built-in self-test (BIST) to detect structural hardware faults.
This webinar will describe:
– Relevance of functional safety to the automotive market
– Synopsys Memory BIST and Interface IP Test solutions to address Automotive safety requirements in SoCs
– Bosch’s approach and results in leveraging Synopsys DesignWare® STAR Memory Solution® (SMS), STAR Hierarchical Solution (SHS) and DFTMAX LogicBIST
The Webinar will take place on 10th October 2017, at 18:00 CET, 5:00pm BST (09:00 Pacific time). Registration is here.
The presenters are; Yervant Zorian, Fellow & Chief Architect, Synopsys; and Christophe Eychenne, DFT Architect, Bosch.
Synopsys; www.synopsys.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :