The collaboration has resulted in a wireless transmit and receive system operating between 270 and 320GHz, with further frequency extensions for potential 6G bands already in preparation.
6G research is already underway in industry and academia. While 5G introduces mmWave frequencies with wider bandwidths for higher data rates and enables new applications in wireless factory automation (Industrial IoT) and for autonomous vehicles, the aim of 6G is to push the boundaries of transmission bandwidths even higher.
Although it is not clear yet which technologies 6G will entail, it is already apparent that frequency bandwidths need to be further increased to enable terabit class data rates. Wide contiguous frequency blocks can only be found at sub-THz and THz bands, i.e. in the frequency range above 100 GHz. The utilization of THz frequencies for 6G is estimated to become commercial in the next 8 to 10 years. But Rohde & Schwarz has already presented a demonstrator setup for 300 GHz to customers. The system was also displayed at the EuMW2019 in Paris as part of a workshop on mmWave and THz Wireless Communication, where it consisted of 300 GHz transceiver frontends, the R&S SMW200A vector signal generator and R&S FSW43 signal and spectrum analyzer as well as of units for synchronization of transmitter and receiver.
The HHI works on signal processing, synchronization between transmitter and receiver, and system integration while the IAF contributes with high-performance millimeter-wave transmitter and receiver modules. The joint research targets frequencies above 100 GHz, where the primary focus is on the D-band (150 GHz) and the H-band (300 GHz). Carrier frequencies above 300 GHz are still subject of fundamental research. A first demonstrator resulting from the research collaboration is a system allowing signal generation and signal analysis at 300 GHz with 2 GHz bandwidth. The signal can be arbitrary modulated for conducting transmission experiments with Beyond 5G candidate waveforms, which are appropriate for THz communication or for performing channel propagation measurements.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.