Wire-to-Board IDC connectors in two pitches

Wire-to-Board IDC connectors in two pitches

New Products |
By eeNews Europe

The IDC area of the series 601 is designed for a cable cross-section of AWG 28 – 22, with a pitch of 2.54mm. The cable cross-section of the series 602 is configured for AWG 24 – 18, with a pitch of 3.96mm. The female headers of both series can be supplied as pass-through or end options, with or without coding (601 only). With regards to the pin headers, it is possible to choose between a straight and right-angled version, which is offered with an additional latching option. Protective caps can also be procured to ensure a safe connection and a strain relief (female headers). With a copper alloy as contact material, the series differ in terms of current rating and voltage rating: 3 A and 250 V AC with the series 601, 5 A and 600 V AC with the series 602.

The number of contacts ranges from 02 – 16 (series 601) and 02 – 20 (series 602), with the exception of the pin headers of the series 601, which can be procured right up to a 40-pin version.

The insulator material consists of thermoplastic in accordance with UL94 V-2 and UL94 V-0. Safe functionality is guaranteed within a temperature range of -25° C to +85° C, processing takes place through wave soldering.

W+P Products GmbH –

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles