Wire-to-wire connector DIN mounts combine speed of connectivity and durability
The terminal blocks enable quick, ‘plug-in’ connections to be made that are simultaneously solid and vibration free, mounted on DIN rail. Whilst there are many manufacturers of plug in terminal blocks, most are not DIN mountable, alternatively they are DIN rail mount mountable, but not plug in. Accordingly, Euroclamp’s ‘vertical reversed’ SVR-DR has found a niche market in electronic housings and enclosure equipment manufacturers who required a wire-to-wire connection via a DIN rail mounted terminal block.
Offering compatibility and familiarity, the SVR-DR is designed to be plugged into Euroclamp’s SF plug in connector. The SF has an inverted mounting system that has male contacts thus allowing the SF to connect directly and easily to the SVR-SR, providing the wire-to-wire connection. The SVR-DR can also be plugged into Euroclamp’s PV PCB connector if a PCB connection is needed. An EN60335 (glow wire) version also available. SVR-DR’s DIN foot can be fitted to DIN rail of the following sizes, 35×7.5mm, 35x15mm and onto DIN 32 and DIN 15 rail. The terminal block is available in sizes from 2 to 24 poles and will accept 4sq mm solid and 2.5sq mm stranded wire. With its detachable foot element for mounting onto DIN rail, Euroclamp’s SVR-DR sits alongside two sister SVR models, the standard flangeless model for surface mounting, and a model that has a flange at each end for surface mounting with screws.
Visit Switchtec at www.switchtec.co.uk
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
