Wired medical electronic enclosures now in three sizes
Each ergonomic case comprises two shells, offering a choice of which side to make the top. One shell is convex for comfortable handheld use, the other is flattened with a recessed panel to accommodate a membrane keypad. They snap together so no screws are needed. Open apertures at either end enable the installation of cable glands for cables 3.4 to 5.9mm in diameter. The cable gland kits include a strain relief feature. End panels are available to blank off any unused cutouts. These panels (and the flat sides) can be machined to accept USB connectors or LEDs. Four attachment pillars in the flat enclosure shell enable the easy mounting of a PCB. Connect can be specified in three lengths: 76/116/156x54x22mm. The enclosures are moulded from UV-stable ASA+PC-FR (UL 94 V-0). Accessories for these electronic enclosures include a bedrail holding clamp, soft-touch cable gland kits (in volcano grey or black) with integrated strain relief and kink protection; end panels (off-white or black); self-tapping screws.
OKW – www.okw.co.uk