MENU

Wireless M-Bus-compatible ICs for smart meters in Europe

Wireless M-Bus-compatible ICs for smart meters in Europe

New Products |
By eeNews Europe



Signal processing functions required for each mode are built in, reducing microcontroller load by about 20% and contributing to lower power consumption of the entire system along with longer operating time and reduced maintenance for battery-operated smart meters. The 868MHz band Wireless M-Bus has 3 modes. Signals must be discriminated differently for each mode based on the operating function. Conventionally, packet processing for discriminating modes and messages was commonly performed by software on the microcontroller side, placing an extremely high load on the microcontroller, resulting in higher power consumption.

 

ML7406, which supports the frequency band from 750 MHz to 960 MHz, is compatible with the ARIB STD-T108 standard in Japan as well as the global standard IEEE802.15.4g, making it suitable for a wide range of fields throughout the world, including smart meters and energy management systems (EMS).

Lapis Semiconductor, in collaboration with Steinbeis, member of the group responsible for establishing the OMS (Open Metering System) protocol, developed specifications for hardware-based packet processing and integrated a Wireless M-Bus packet handler into the IC. The packet handler is designed to perform hardware-based processing of a variety of functions, such as simultaneous standby for interoperability between C and T Modes, automatic discrimination of Format A and B messages in C Mode, and address filtering that automatically distinguishes whether packets are intended for this or other devices. As a result, microcontroller operating rate is reduced by about 20% compared with conventional software-based systems, significantly cutting device power consumption.

Lapis can supply sample software and C source code that includes all of the T, C, and S Mode functions compatible with EN113757-4:2011 in the Wireless M-Bus protocol stack. In addition, an industry-standard OMS-compatible protocol stack that can be used without modification in OMS-based meters, along with Wireless M-Bus protocol analysis software, can be licensed from Steinbeis.

The 868MHz ML7406 joins the ML7344E, which is compatible with the 169 MHz (N Mode) and 433 MHz (F Mode) bands, completing Lapis Semiconductor’s lineup for the Wireless M-Bus standard and ensuring compatibility with smart meter applications throughout Europe.

By controlling the built-in timer using internal 32 kHz RC oscillator or external clock input, the IC can periodically, without any instructions from the microcontroller, wake up from Sleep Mode, run in Receive or Send Mode, and then return to Sleep Mode. Combining this operation with a high-speed radio check function allows the microcontroller to regularly detect the presence of radio waves in the shortest time possible and, if no radio waves exist, go back to sleep. The ML7406 features five sleep modes (including Deep Sleep mode). The most suitable sleep mode can be selected based on system configuration and needs.

Lapis Semiconductor; www.lapis-semi.com/en/inquiry/index.html

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s