Wireless Sensor Network Challenges and Solutions

Wireless Sensor Network Challenges and Solutions

Technology News |
By eeNews Europe

With such strong cost motivation, why have wireless sensor networks (WSNs) not come to dominate the market? Two factors—radio power and network reliability—have kept WSNs largely “niche” products.

Technology Choices

Customers want a technology that is low cost, allows unrestricted sensor placement, reliable and quick data reporting, and runs for years with no battery changes. Recent advances in low-power radios and communications protocols have enabled us to deliver those features in many markets.

Data collection applications typically involve large numbers of sense points forwarding data to a central host that may respond with a process set-point or other configuration changes. There are several technologies competing to fill this role, including satellite, cellular, Wi-Fi, and IEEE 802.15.4-based solutions.

Satellite and cellular have the highest energy cost per packet, and are generally unsuitable for battery powered applications. These solutions make sense only for applications sending at a very low data rate (e.g., one data packet per day) with known good connectivity.

Wi-Fi (IEEE 802.11b, g) sensors are now widely available. The energy cost for a Wi-Fi packet is much lower than cellular, but still high for battery powered operation. Connectivity and coverage remain important concerns, as the density of access points necessary for reliable communication with a fixed sensor is typically high.

The IEEE 802.15.4 standard defines a physical layer (PHY) and Medium Access Control (MAC) layer for short-range, low-power operation, ideal for WSNs. IEEE 802.15.4 forms the basis of several proprietary and standards-based protocols including ZigBee unsynchronized single-channel networks, and WirelessHART1 time-synchronized multichannel networks. Using Linear Technology’s LTC5800-IPM802.15.4 Mote-on-Chip™, sending a few bytes of sensor data, with routing, cryptography, and other headers uses under 30µC of charge, including receiving a secure link-layer acknowledgement (see Figure 1).


Figure 1 – Energy to transmit a short 802.15.4 packet and receive an acknowledgement.


Mesh Networks

Reliability is a concern when transitioning to wireless systems. The wireless channel is unreliable in nature, and a number of phenomena can prevent a transmitted packet from reaching a receiver – these can be exacerbated as radio power decreases.

Interference occurs when multiple transmitters send at the same time and frequency. This is particularly problematic if they cannot hear each other (the “hidden terminal problem”). Backoff, retransmission, and acknowledgement mechanisms are required to resolve collisions. Interference can come from within the network, another similar network operating in the same radio space, or from a different radio technology operating in-band—a common occurrence in the band shared by Wi-Fi, Bluetooth, and 802.15.4.

A second highly varying phenomenon called multipath fading can prevent successful transmission even when the line-of-sight link margin is expected to be sufficient. This occurs when multiple copies of the transmission bounce off objects in the environment (ceilings, doors, people, etc.) all traveling different distances. When interfering destructively, fades of 20-30dB are common. Multipath fading depends on the transmission frequency, device position, and on every nearby object – predicting it is practically impossible.

Because objects in the environment move, the multipath effect changes over time, and it is unsafe to rely on any particular connection between devices, or path, to be useable forever. Figure 2 shows the packet delivery ratio on a single wireless path between two industrial sensors over the course of 26 days, and for each of the sixteen channels used by the system. At any given time some channels are good (high delivery), others bad, and still others highly varying. Importantly, there was no period observed where a channel was good on all paths everywhere in the network.2

Figure 2 – The packet delivery ratio of a wireless link evolves over time. For higher resolution click here.

Because of interference and multipath fading, the key to building a reliable wireless system is to exploit channel and path diversity. In a mesh network, sensors can forward radio packets from peers, extending the range of the network far beyond the range of a single radio, and providing the network with immunity to any single radio link failure. Using a Time Division Multiple Access (TDMA) scheme mitigates self-collision and allows for predictable network scaling.

Several mesh protocols are available for sensor networking: 802.11s for Wi-Fi, various ad-hoc routing protocols such as those used in ZigBee, and Linear Technology’s Time Synchronized Mesh Protocol, which forms the basis of the WirelessHART and 802.15.4e standards.


Key selection criteria for a WSN technology are cost of ownership and flexibility. Wireless technologies reduce installation costs dramatically compared to wired solutions, but battery changes needed for lifetime goals increase total ownership costs. Protocols must be designed to scale both in density and total number of sensors, to tolerate interference, and survive the loss of individual devices.

WSNs must be designed to work reliably in environments with wide temperature variations, and with link-layer packet delivery ratios (PDR) down to about 50%. For industrial applications, the reliability target is typically to receive at least 99.9% of the generated data, as missing data can trigger expensive alarm conditions. The system must support some minimum number of sensor data packets per second with bounded latency – “stale” packets are typically discarded and count against reliability.


Linear’s Dust Networks SmartMesh™ product line contains both WirelessHART and 6LoWPAN-compliant IPv6 product offerings that leverage 802.15.4 to provide the most reliable, lowest power, secure WSN solutions on the market. Dust Eterna™ motes (LTC5800 family) are single chip devices that couple a Cortex-M3 microprocessor, memory, and peripherals to the lowest power 802.15.4 radio available today. Designers embed a mote in their sensor package, and can rely on the network to form, optimize, and carry their sensor data to their application. Dust’s managers allow for graceful scaling from tens to thousands of devices, providing data and configuration interfaces for the network. Both product families build highly reliable, multi-hop mesh networks capable of per-node configurable data rates. Some examples of applications using Dust motes and managers include:

Parking – Streetline3 is a smart parking provider that monitors real-time parking space availability with vehicle detectors underneath the spaces and aggregates information into a citywide database. Low-power wireless technology is critical for this application because it is intractable to wire sensors to each space, and path diversity is essential as different vehicle positions change the path quality between device pairs.

Energy Monitoring– Vigilent4 provides intelligent energy management systems for data centers, where air conditioning is often run continuously at full power, wasting energy. Vigilent deploys dense, secure wireless devices that do not interfere with regular data center operation, and has routinely deployed multiple overlapping networks to achieve the required number of sensors.


Multichannel time-synchronized mesh networks based on 802.15.4 radios address many of the challenges involved in building flexible, reliable, low-power wireless sensor networks.


About the authors:

Lance Doherty, and Thomas Watteyne are systems engineers in the Dust Networks Group, Linear Technoogy Corp. Jonathan Simon is Systems Engineering Director, Dust Networks Product Group, Linear Technology Corporation.




2. L. Doherty, W. Lindsay, J. Simon, K. Pister, “Channel-Specific Wireless Sensor Network Path Analysis,” Proc. ICCCN ’07, Honolulu, HI, 2007.



If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles