Würth, Nordic team for IoT module
Nordic Semiconductor has teamed up with Würth Elektronik in Germany on a wireless mesh module for the Internet of Things (IoT).
Nordic’s nRF52840 Bluetooth 5.2/Bluetooth Low Energy (Bluetooth LE) multiprotocol System-on-Chip (SoC) is used on the ‘Thetis-I’ module for supply chain, asset tracking, smart lighting, and smart metering applications
Thetis-I is supplied pre-installed with ‘Wirepas Massive’ (previously Wirepas Mesh), a decentralized mesh networking solution, ensuring the module is optimized for large-scale IoT networks. Wirepas Massive has been developed by the global software connectivity company, Wirepas, and is designed for a wide array of ‘massive IoT’ applications. The agreement between Würth Elektronik and Wirepas means companies designing-in the Thetis-I module can go into production without having a Wirepas Software License Agreement as this is covered by Würth.
The SoC combines a 64MHz, 32-bit ARM Cortex M4 processor with floating point unit (FPU) with a 2.4GHz multiprotocol radio supporting Bluetooth 5, ANT, Thread, Zigbee, IEEE 802.15.4, and proprietary 2.4GHz RF protocol software with 1MB Flash memory and 256kB RAM. The radio with on-chip PA provides features -95dBm RX sensitivity (at 1Mbps Bluetooth LE), a maximum output power of 8dBm, and a total link budget of 103dBm.
Related articles
- Nordic launches its first PMIC as the start of a series
- Imagination sells its Ensigma WiFi6 business to Nordic Semi
- Nordic, Edge Impulse team for embedded AI on Bluetooth
- Norbit signs IoT deal with Nordic Semi
The Thetis-I module can be integrated into any embedded application to enable Wirepas Massive mesh networking capabilities. The powerful, pre-certified ready-to-use firmware enables robust and secure data transmissions in mesh configurations between Thetis-I modules and/or to other Wirepas Massive-enabled sensor devices in the network. Any device using the module can be authenticated in a secure manner while joining the targeted network.
The module supports either stand-alone (single MCU) operation—where a Thetis-I-module integrates the Wirepas Massive firmware and the custom developed application as an individualized product—or host-controlled (dual MCU) operation, where the application runs on an external microcontroller and Thetis-I is used as an off-the-shelf product.
Each device integrating a Thetis-I radio module can also perform as a low power router meaning no further infrastructure is required for mesh communication. Such a router can have a lower than 30µA power consumption while still keeping active bidirectional communication.
The Thetis-I module is supplied in an 8 by 12 by 2mm form factor and can be configured to use either the on-board PCB antenna (ensuring the module can be easily designed-in to compact end devices), or an external antenna of the developer’s choice—for high performance and extensive range. Using the nRF52840 SoC, the module also provides extremely low current consumption, making it suitable for battery driven applications.
Würth Elektronik offers developers the ‘Thetis-I Evaluation Kit’ containing an evaluation board (which allows a controller board to be connected for developing applications), USB radio stick, and three battery-powered sensor boards with a pressure sensor and humidity sensor (both also integrating a temperature sensor) providing an application example for a Wirepas Massive network. The ready-to-use kit enables product evaluation and rapid prototyping of a Wirepas Massive network. The prototype network can be tested in the field under real environmental conditions. Both the Thetis-I module and Thetis-I Evaluation Kit can be configured remotely from a PC using the free-of-charge Wirepas Commander software. Wirepas technology enables easy connection to established Cloud platforms.
“We selected Nordic’s nRF52840 SoC for our Thetis-I module because of the chip’s size, radio sensitivity and power consumption,” says Luca Settembre – Product Manager for GNSS and Wirepas products at Würth Elektronik.
“In addition, we took advantage of Nordic’s very good technical knowledge especially in the 2.4GHz field, the company’s fast response times, single and dual MCU reference designs, and its Software Development Kit [SDK] which is one of the best on the market and allows easy firmware development.”
“Würth Elektronik’s Thetis-I module has made it easier than ever for design partners to kick-start a development with Wirepas Massive,” says Thomas Weisshaupt, Head of D-A-CH for Wirepas.
“Even if the business case of an IoT project often implies high density and large scale in one network you have to start with one device. Würth Elektronik offers a rapid prototyping opportunity. Nordic’s long term relationship with both Wirepas and Würth Elektronik now delivers a unique offer to the IoT community.”
www.nordicsemi.com; www.we-online.com
Other articles on eeNews Europe
- Rolf Segger on the chip shortage
- Intel with an old take on big.little for Alder Lake
- IBM shows first dedicated AI inference chip
- UK looks to catch up in solid-state batteries
- LG, Fraunhofer team for 6G wireless link
- ARM Nvidia deal goes to full investigation in the UK
- How long has the semiconductor industry got?
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
