Xilinx Zynq UltraScale+ SoC module with two memory channels
The module also has numerous standard interfaces, 178 user I/Os and up to 10 GByte of extremely fast DDR4 SDRAM. Two independent storage channels – one on the PS and one on the PL – help the module achieve a 24 Gbyte/s memory bandwidth.
The Mercury XU5 MPSoC also has more direct interfaces to the FPGA fabric. The module, which measures only 56 × 54 mm, has up to 8 GByte DDR4 ECC SDRAM connected directly to the processing system, 16 GByte eMMC flash memory as well as interfaces, such as Gigabit Ethernet, USB 3.0, a display port, SATA and SGMII. The processing system and the FPGA matrix have four PCIe Gen2/3 connections.
The 6 ARM cores – four 64-bit ARM Cortex-A53 at up to 1333 MHz and a 600 MHz fast 32-bit ARM dual-core Cortex-R5 are supported by a Mali 400MP2 GPU and an H.264/H.265 video codec.
Enclustra also offers all of the hardware, software and support materials for the XU5. In addition to the user manual, user schema, a 3D-model (STEP), PCB footprint (Altium, OrCA, PADS, EAGLE) and differential I/O length tables.
The Enclustra Build Environment can compile Enclustra SoC modules with an integrated ARM processor very smoothly. The module and baseboard are selected by a graphical interface. The Enclustra Build Environment then downloads the appropriate Bitstream, First Stage Boot Loader (FSBL) and required source code. Finally, U-Boot, Linux and the root file system, which is based on BusyBox, are compiled.
Different types of modules can be used on the same base board.
More information
Related news
Mars form factor SoC module is based on Xilinx Zynq UltraScale+ MPSoC
Xilinx Zynq UltraScale+ MPSoC module
Display and Drive Control using FPGAs
Xilinx Zynq UltraScale+ SoC module smaller than a credit card
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :