Xtal oscillators offer ultra-low phase noise

Xtal oscillators offer ultra-low phase noise

New Products |
By Christoph Hammerschmidt

The new surface mount HJ22 oscillators offer 15pF load LVCMOS output at frequencies from 20 to 50MHz with typical RMS phase jitter of just 48fs, 300fs maximum. Phase noise is 153dBc/Hz at 10kHz offset and -166dBc/Hz at 100kHz offset (49.152MHz output frequency, 3.3V input model)

Housed in an ultra-miniature surface mount package measuring just 2.5 x 2.0 x 0.9mm, the new HJ22 oscillators are available with 1.8, 2.5 or 3.3V power supply requirements and offer typical current consumption of just 3mA, 5mA maximum. Frequency stability over both commercial (-10 to +70°C) and industrial (-40 to +85°C) temperature ranges can be specified as ±25, ±50 or ±100ppm as standard. MEC Europe can also provide non-standard frequency stability specifications if required, e.g., ±20 or ±30ppm.

Specifications include ageing of ±3ppm/year maximum for first year, start-up time of 0.8ms typical, 5.0ms maximum, rise/fall time of 5ns typical, 10ns maximum and duty cycle (symmetry) of 50% ±5%. Output enable/disable is provided as standard.

Ideal for embedded automotive applications, the new HJ22 oscillators join MEC Europe’s HJ series that also includes package sizes of 3.2 x 2.5 x 1.0mm, 5.0 x 3.2 x 1.2mm and 7.0 x 5.0 x 1.4mm.

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles