MENU

ZIF plug connector series with a pitch of 0.5mm

ZIF plug connector series with a pitch of 0.5mm

New Products |
By eeNews Europe



The HF601 offers the additional feature of being shaped in such a way that it is capable of accepting FFCs with "ears". This provides some security against the FFC being pulled out. There is a horizontal variant with 10, 20, 26, 30, 40, 45, 50, or 60 pins. This version features a particularly low installation height of 2mm. Yamaichi also offers the appropriate alternatives in a vertical type. The pin counts available are 30, 40, 45 and 50. A special feature of these two variants is the shape of the contacts and their gold plating, which guarantee transmission rates of 700Mbps to 1 Gbps. This is a clear distinction from conventional ZIF connectors, which offer only about 50% of this performance. A 22-pin horizontal version transmits up to 3Gbps at a stable impedance of 100 ohms (+/- 10%). This is ensured by switching to ground between each pair of signal contacts. This connector can be used as an HDMI interface, for example.

Visit Yamaichi at www.yamaichi.eu

Get the data sheet at www.yamaichi.eu/pdf/c_hf60i-mit-ffc.pdf

 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s