Calibration reveals order of magnitude better accuracy, says Yokogawa

October 12, 2015 //By Julien Happich
Calibration reveals order of magnitude better accuracy, says Yokogawa
Having just received the ISO17025 accreditation for its brand new European Calibration Laboratory at its European headquarters in Amersfoort, Yokogawa Europe B.V. took its centenary anniversary (it was founded in Japan in September 1, 1915) as an opportunity to make the news public and highlight the accreditation's implications for its customers.

Running an in-house power calibration lab is not new per se, admitted the company’s Vice President Terry Marrinan, Yokogawa and its competitors have been doing this for many years for their customers.

"Five years ago, we started discussing the possibility to get accredited to the ISO17025 standard, it required new equipment for our lab but it would strengthen our position as the undisputed authority in power measurement", Marrinan told us, highlighting that the company already had over 60% of market share in the bench top power meter business.

"Many companies provides power meters with high power measurement bandwidths well above 50/60 Hz, but even if the power accuracy for their measurement conditions is clearly specified, where is the proof?" asked Marrinan.

Later, Erik Kroon, Manager of Yokogawa's European Standards Laboratory embarked himself and his team in a three-and-a-half years journey to accreditation.

"There are other labs offering calibration services, but what we've heard from customers is that other labs often let them behind, calibration at 50/60Hz is not enough. We are going to specialize ourselves calibrating electrical power from DC to AC, and from 10Hz to 100kHz while still being able to offer extreme accurate calibration around 50 to 60Hz, even at a low power factor of 0.0001 and at high currents".

The efforts paid off. The company has become the world's first non-governmental facility to receive full ISO17025 accreditation for power measurements at up to 100kHz. We then learned that it is also working on MHz range power meter calibration.

This accreditation addresses the growing demand to remove uncertainty in power measurements, particularly with the growing focus on renewable energy markets and the need to optimise energy efficiency while complying with international standards on power quality, especially at low power factors.

In addition, the inverters used in renewable energy systems are switching at higher speeds: a scenario that introduces harmonics at higher frequencies.

There is also a demand for high-frequency power measurements on devices such as switch-mode power supplies, electronic lighting ballasts, soft starters in motor controls and frequency converters in traction applications.

"The recognition offered by ISO17025 accreditation is an objective proof that the knowledge of our personnel and the quality of our instruments are at a world-class level", said Marrinan.

The accreditation is particularly critical for customers working with tight tolerances. In fact, Kroon revealed that often by having their instrument calibrated, Yokogawa's customers could benefit from a much more accurate instrument than originally specified on the spread sheets at factory level.

"Typically, we reveal an accuracy eight to ten times that of our specifications, sometimes we can offer a 20 fold increase in precision", said Kroon.

So why not make the claim directly on the datasheets as you sell the instruments? We asked.


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.