Compact anti-vandal switch accommodates limited space

April 08, 2020 //By Julien Happich
The SV series of anti-vandal push-buttons from E-Switch is available in three panel cutout sizes, SV4 at 19mm, SV7 at 22mm and SV8 at 25mm.

The body depth of the SV4, SV7 and SV8 is 19.2mm compared to the PV series equivalent which ranges from 34mm to 41mm in depth, depending on specific model. All SV models offer solder lug termination or soldered wire leads – 500mm long termination options. The SV series is rated IP67 for moisture and dust protection and SPST contact arrangement. The SV series is available in stainless steel finish for body and actuator. All three models offer ring illumination or ring/power symbol combo on a flat actuator; both lens styles are movable with the actuator. Multiple LED color options and illumination voltage are available. Electrical rating is 2A, 36VDC with 200,000 cycle electrical life. The SV series provides 1.80mm travel, actuation force of 4.5N., dielectric strength is 2,000V RMS at sea level and the operating/storage temperature range from -20°C to 70°C. The units are suitable for panel thicknesses from 1 to 6mm, mounting nut torque is 1Nm – 3Nm.

E-Switch -

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.