FTDI launches range of USB interface chips

February 29, 2012 // By Nick Flaherty
FTDI launches range of USB interface chips
Glasgow chip designer Future Technology Devices International Limited (FTDI) has developed a range of USB to serial interface products in 13 different package and interface options. The 180nm X-Chip family supports a broad selection of interface types, such as basic UART, full UART, FIFO and I2C, as well as FTDI’s proprietary FT1248 I/O (including provision for enhanced SPI).

Devices in the series are capable of data rates of up to 3.4 Mbits/s, while maintaining low power consumption, <8mA (typical) when fully active and <125 µA (typical) while in suspend mode. With recent amendments being made to the USB specification regarding more rapid charging of portable electronics devices, the X-Chip has built-in functionality to detect a charging port and cause logic to switch from data transfer to charging mode. This feature means that detection does not have to be carried out by the system’s micocontroller or microprocessor, allowing it to focus fully on its core activities. The end result is a simpler detection process and the capability to charge at a higher current level which shortens the time required for battery charging.
Windows 7, Windows Vista, Windows XP, Windows XP Embedded, Windows CE, Mac OS-X, Linux 3.2 (and above), plus Android operating systems are all supported, furnishing engineers with maximum design flexibility. Furthermore, the required USB drivers are free to download from the FTDI website. Since the entire USB protocol is handled by the device, the need for the programming of USB specific firmware can be negated. An internal 2048 byte, multi-time programmable (MTP) memory enables storage and configuration of the necessary device descriptors.
“By specifying the X-Chip into their designs, engineers will reduce their overall bill of materials and optimise PCB real estate,” said Fred Dart, CEO and founder of FTDI. “With its comprehensive feature set, the benefits of lower power, smaller device footprint and enhanced battery charging can all be realised, as well as the robust USB functionality that FTDI has always provided in its connectivity solutions.“
The devices in the X-Chip series are offered in compact SSOP, QFN and DFN packages. Each has an operational temperature range of -40 °C to +85 °C. As all the necessary USB support and bridging intelligence has been integrated into these devices and pre-validated, the expense, time and engineering resource

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.