Intersection assistant systems make use of car-to-x communications

May 18, 2011 // By Christoph Hammerschmidt
Intersection assistant systems make use of car-to-x communications
BMW and Volkswagen have developed prototypes of "smart" intersection assistant systems aiming at improving the safety in blind or complex intersections. The assistant systems demo for the first time a practical use of the car-to-x communications scheme. Both systems were developed independent of each other, but as a contribution to the Intersafe-2 research project.

Accidents at intersections are among the most frequent causes for intra-urban traffic injuries and fatalities. For this reason, the participants of the Intersafe-2 project developed solutions to reduce the risk for vehicle occupants during a turn maneuver - in particular in situation with restricted visibility due to obstacles.

BMW's intersection assistant is activated by an array of sensors. Based on highly precise location, a navigation system can determine that the vehicle is moving on a turning lane. In addition, a camera tracks the road markings; a downstream image processing software recognizes if the vehicle is on a moving lane. Once the intersection assistant has been activated, three front-side laser scanners monitor the road space ahead at distances of up to 100 meters. BMW points out that the laser sensors can identify also relatively small vehicles including motorbikes. Motorbike drivers are among the most frequent victims of carelessly conducted turns.

In case the system detects oncoming traffic but continues to move into the intersection, the assistant system at speeds of up to 10 km/h automatically conducts an emergency braking and brings the car to a full stop. At the same time, it issues acoustic and optic warning signals. In order to improve the safety situation, the driver however can override the system at any time.

In addition to the laser scanners and the camera, the vehicle is also equipped with a car-to-x communications unit. This does not only enhance the range of the vehicle detection to 250 meters, it also enables the drivers involved to recognize each other mutually even if they are obscured by an obstacle. However, both partners need to be equipped with the respective communications devices. In this case, an algorithm in the device computes the trajectory of all vehicles involved and identifies critical situations already before the driver(s) are able to recognize them visually. In this case, a car-to-car communications process takes place; both vehicles exchange data

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.