Memristors combine ferroelectrics and graphene for neuromorphic chips

November 23, 2020 //By Nick Flaherty
Memristors combine ferroelectrics and graphene for neuromorphic chips
Researchers at the University of Groningen in the Netherlands have used graphene with a perovskite ferroelectric material for a memristor that could be used for a neuromorphic chip.

To create memristors, switches with a memory of past events, strontium titanium oxide (STO) is often used. This material is a perovskite, whose crystal structure depends on temperature, and can become an incipient ferroelectric at low temperatures. However the ferroelectric behaviour is lost above 105 Kelvin, and the domains and domain walls that accompany these phase transitions are the subject of active research.

“It is in a league of its own,” says Tamalika Banerjee, Professor of Spintronics of Functional Materials at the Zernike Institute for Advanced Materials, University of Groningen.

The oxygen atoms in the crystal appear to be key to its behaviour. “Oxygen vacancies can move through the crystal and these defects are important,” she says. “Furthermore, domain walls are present in the material and they move when a voltage is applied to it.”

Instead Banerjee's team used graphene.

“The properties of graphene are defined by its purity,” said Banerjee, “whereas the properties of STO arise from imperfections in the crystal structure. We found that combining them leads to new insights and possibilities.”

Placing graphene strips on top of a flake of STO and measuring the conductivity at different temperatures by sweeping a gate voltage between positive and negative values showed the potential. 'When there is an excess of either electrons or the positive holes, created by the gate voltage, graphene becomes conductive,' said researcher Si Chen. “But at the point where there are very small amounts of electrons and holes, the Dirac point, conductivity is limited.”

In normal circumstances, the minimum conductivity position does not change with the sweeping direction of the gate voltage. However, in the graphene strips on top of STO, there is a large separation between the minimum conductivity positions for the forward sweep and the backward sweep. The effect is very clear at 4 Kelvin, but less pronounced at 105 Kelvin or at 150

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.