PCIe 3.0/SATA3 combo ReDriver is low power

January 23, 2020 //By Julien Happich
The PI3EQX12904A PCIe 3.0/SATA3 combo ReDriver from Diodes Incorporated offers linear equalization to support speeds up to 8Gbps.

As solid-state drives (SSDs) continue to displace HDDs in notebooks, laptops, industrial PCs, and embedded systems, there is increasing demand for interface devices that can drive extended PCB track lengths without degrading the signal. By complying with both PCIe 3.0 and SATA3 protocols, the PI3EQX12904A provides manufacturers with a single solution that can be used in multiple products.

Designers need to address the potential performance issues inherent with driving control and data signals across a switch fabric, cables, PCB tracks or other connections. While most ReDrivers can provide the extra drive required to achieve this, the PI3EQX12904A also adds programmable equalization, linear swing, and flat gain capability to provide optimal performance when using various physical mediums. It features four 100Ω differential CML data I/O signals and is transparent to link training. Its adaptive power management features include automatic low-power mode with automatic receiver detection. In slumber mode, the inputs are monitored for any activity, and if detected, the corresponding channel automatically switches to active mode. The IC comes in a 42-TQFN package.

Diodes - www.diodes.com

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.