Ruggedized I/O field interface

September 16, 2019 //By Julien Happich
interface connector
The 2-in, 2-out NA2-IO-DPRO Dante interface features two switchable Mic, Line, AES/EBU inputs and two switchable analogue, Line, AES/EBU outputs, and two Dante ports providing for redundancy or device daisy chaining.

With its small form factor, metal construction, and removable protective rubber casing, the NA2-IO-DPRO offers a rugged, reliable solution optimally suited to a wide range of applications. The NA2-IO-DPRO front panel provides two latching XLR inputs and two XLR outputs. AES/EBU operation is seamlessly and independently auto detected for inputs and outputs. Using Neutrik’s free DPRO controller software for Mac or PC, +48V phantom power can be applied, microphone preamplifier gain, pad, and high-pass filtering can be set per channel, and input channels can be linked for matched operation. Output channels can be muted or unmuted within the software. The rear panel provides primary and secondary Dante ports on Neutrik etherCON connectors. The secondary input can be configured for redundant or Switched mode (for daisy chaining). When operating in Switched mode, in conjunction with a 60 W PoE injector, up to eight devices can be daisy chained. Up to four devices can be daisy chained with a 30 W PoE injector. NA2-IO-DPRO is AES67 compliant. Power must be supplied externally via either a PoE switch or a PoE injector per IEEE 802.3af/at, class 2 or no classification at 6W. With optional mounting brackets or a rack panel, the NA2-IO-DPRO can be mounted below tables, in floor boxes, in racks, or on the stage truss.

Neutrik AG – www.neutrik.com


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.