Segger Microcontroller is working with Analog Devices on the development of industrial Ethernet applications including the new Ethernet-APL standard for data and power over 1 km of single twisted pair cables at 10 MBit/s full-duplex.
The collaboration between the two companies revolves around emNet, Segger’s IP stack, and the ADIN1110, Analog Devices' robust, low-power industrial 10BASE-T1L Ethernet MAC-PHY device. The combination of emNet and ADIN1110 enables applications with minimum energy consumption, fast transmission rates, and high reliability.
Related Ethernet articles
- Long reach industrial chips for last mile connections
- All-in-one embedded software stack to help chip shortage
“The joint effort by Segger and Analog Devices enables customers to quickly integrate a TCP/IP-based solution in their devices,” said Stefan Lueder, Project Manager Ethernet-APL integration at Siemens.
The emNet IP stack combines maximum performance with minimal memory requirements and simple integration without configuration effort. The ADIN1110 MAC-PHY simplifies connectivity to any low-power processor through an SPI interface, providing increased flexibility on processor selection.
The combination of emNet and the ADIN1110 allows ultra-low-power microcontrollers with minimal flash memory and without their own MAC to be used as emNet supports external MACs such as the ADIN1110, enabling any standard microcontroller to attach to Ethernet. emNet is also highly efficient in terms of flash, RAM, and packet processing speed so that even small, low-frequency microcontrollers deliver excellent network performance. The low power operation is suitable for safe operation in explosive environments in the process industry, among others.
Segger’s emNet in combination with the ADIN1110 also supports the new Ethernet-APL standard and is compliant to IEEE802.3cg for 10BASE-T1L Technology. This provides access to new data and insights from devices located in remote and hazardous areas, supporting real time configuration in the field of a process plant. Ethernet-APL-based sensors and actuators for the process industry are currently being developed by numerous suppliers including Siemens.
“ADI’s new ADIN1110 10BASE-T1L MAC-PHY and Segger's emNet combine to provide an extremely fast path to market for low power, single pair ethernet communications solution. This is ideal for sensor or actuator nodes for many use cases including those in hazardous areas,” said Mick McCarthy, Director of Industrial Ethernet Technology at Analog Devices.
“What customers want from an IP stack is a combination of maximum performance and the simplest implementation without major configuration effort,” said Segger's CEO Ivo Geilenbruegge. “Through our collaboration with Analog Devices, industrial customers get the best possible solution because of its high performance, lowest power and ease of implementation.”
emNet offers a BSD-style socket API for user applications. emNet's standard socket interface with zero-copy extensions makes it easy to run existing applications on top of emNet with minimal or no porting effort. emNet works best with an RTOS. Segger highly recommends using embOS, part of SEGGER’s all-in-one embedded OS emPower OS. However, emNet can also be used with other RTOS software
- Segger moves RTOS to 64bits
- Embedded Studio adds Renesas RE family
- Credit card-sized flash programmer can be stacked
- Segger adds J-Link support for Raspberry Pi
Other articles on eeNews Europe