Step-down synchronous DC-DC converters take 12 and 24V inputs

June 10, 2019 //By Julien Happich
Torex Semiconductor has launched the XC9268 series of step-down synchronous DC-DC converters compatible with 36V input and 600mA output, for industrial equipment and consumer appliances having an input source of 12 or 24V.

The XC9268 series has a maximum input voltage of 36V, making it suitable for use as a power supply for step-down from a 12V or 24V line. Its low minimum input voltage of 3.0V makes a maximum d uty of 100% possible, so it can also be applied as a component in an input OR circuit used with a backup line. The operation mode is PWM / PFM automatic switching control. 83% (V IN = 12V, V OUT = 5.0V, I OUT = 1mA) efficiency is realized in the standby load state such as microcontroller. In addition, even with heavy load in the active state, the DC-DC converters achieve 85% or more efficiency and high efficiency is realized in the entire load area. S witching frequency can be selected from either 1.2MHz or 2.2MHz and since it operates by PWM control. The soft-start time has been set internally to be 2.0ms (Typ.), but a time longer than the internal soft-start can be set optionally depending on the resistance and capacity connected to the EN/SS terminal.

Torex Semiconductor -

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.