MENU

Surge protection in a modular connector

Surge protection in a modular connector

New Products |
By eeNews Europe



This means that both digital and analogue circuits are securely protected. Since these signals can be of different types, in addition to a modular combination for I&C signals with common reference potential (generally digital signals), the company also offers a combination for differential signal transmission or for transmission without a common reference signal.

These signals are generally differential types such as bus interfaces up to 5 MHz or analogue signals such as 0/4-20 mA or 0/2-10 V. Both types two-channel types for differential signals and four-channel types for signals with common reference potential can transmit nominal 24V DC and up to 0.5A. The protection level is approximately 50V, depending on the type.

Transients, which can disturb signal circuits and destroy electronic devices, are discharged to the ground via an appropriate spring element and the grounded Han-Modular hinged frame. This ensures interference-free transmission of the signal.

Harting – www.haring.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s