Spring-loaded connectors come pre-wired

January 13, 2020 //By
connectors
Mill-Max Manufacturing has released a new pre-wired spring-loaded connector, a two-position header with crimp terminated wires. This product combines high quality Mill-Max spring-loaded pogo pins with the convenience of a 12” pig-tail to suit a wide variety of applications.

The 867-22-002-70-501010 connector is a cost-effective solution when a wired connection is required in an electrical assembly. Crimping wires to a connector comes with challenges: gang crimping tooling is not readily available and the alternative, crimp and poke connectors, can be time consuming and labor-intensive to use. This connector eliminates those issues and is ready to use in a host of wire termination applications. The open-end wire offers flexible termination possibilities such as soldering, crimping, splicing or connecting to a terminal block. The 867 series uses high reliability Mill-Max spring-loaded pins making it an excellent choice for battery charging, low-power delivery and quick connect purposes. The connector features precision-machined and gold-plated spring pins on 2.54 mm centers, each having a maximum stroke of 1.4mm, with a connector housing molded from high temperature thermoplastic. The two-wire pig-tail is made from 24 AWG stranded conductors; one red, one black, 12” (305 mm) long. The wire is per UL1007 with PVC insulation and 7/32 stranding. Each wire end is stripped to a length of 3.56mm with slug on to prevent fraying. The wire retention of the crimp joint is 3.63 kg minimum and there is a positive stop inside the connector so the pins cannot be dislodged if pull force is applied to the wires.

Mill-Max - www.mill-max.com


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.