HIGHLIGHTS

How to design multi-kW DC/DC converters for electric vehicles (EVs)

28 Jan 2020

We are all well aware that the demand for Electric Vehicles (EV) is increasing rapidly. This eight-part training session will teach you about typical EV power systerms, how the different types of batteries are charged, understand how EV’s are designed, learn an on-board charger design at a high level and how gate drivers can improve your power system.

11 ways to protect your power path

28 Jan 2020

If you're trying to distribute power across your voltage rails or protect your power path, chances are you are going to encounter a critical design tradeoff. This free e-book explains practical tips and some of the lesser known hurdles that you may encounter while optimizing your power path. While this content is comprehensive,  you can learn at your own pace by exploring one of the 11  chapters on critical protection concepts.

Choosing the right SOA for your design: discrete FETs vs. power blocks

27 Jan 2020

In power semiconductors, design engineers use the safe operating area (SOA) to determine whether it’s possible to safely operate a device such as a power metal-oxide semiconductor field-effect transistor (MOSFET), a diode or an insulated-gate bipolar transistor (IGBT) at current and voltage conditions in their application without causing damage to itself or nearby devices. New integrated devices such as power blocks and power stages require a different way to specify SOA.

Leverage TI's online toolbox to tackle thermals before touching a soldering iron

27 Jan 2020

For every 10 degrees in junction temperature rise, the chances of your IC failing doubles. With megatrends like increasing power levels, shrinking PCB area, and smaller and smaller package sizes, how can you protect your system against heat and ensure long-term system reliability? In this thorough training, learn about how to optimize your DC/DC switching regulator design for thermal performance.

LDO Basics e-book

27 Jan 2020

Low dropout regulators (LDOs) are a simple way to regulate an output voltage powered from a higher-voltage input. This LDO e-book provides a comprehensive overview of the basics of what you need to know and what to look for.

LDO Basics

27 Jan 2020

This LDO basics video series will cover topics including dropout voltage, current limit, power supply rejection ration (PSRR), noise, thermals, and many more. The video series will also introduce key performance features, explain impact in power management, give example applications, and answer commonly asked questions.

Voltage References Basics

27 Jan 2020

This training series will highlight what VREFs are, will discuss the values that VREFs bring to different systems, and will review the technical aspects and parameters to consider when designing with VREFs.

LED Driver Basics

27 Jan 2020

This 4-part series allows you learn basic or more advanced LED driver topics at your own pace. With topics such as topology pros & cons, various dimming methods, and how to estimate junction temperature, you'll be well on your way to adding color or animation to your next power project. 

Voltage Supervisors 101

27 Jan 2020

Many people confuse voltage supervisors with voltage monitors, voltage detectors, and reset ICs; however, these devices are all the same. Learn about the basics with this Voltage Supervisors 101 training series.

Display University Training Series

27 Jan 2020

In this on-demand training series, learn about a variety of LCD and OLED display power and backlighting design topics from TI experts.  You can choose which curriculum best suits your needs and learn at your own pace through this series, which covers a broad spectrum of subject matter from display basics to more in depth videos on design considerations and overcoming specific display design challenges. 

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.